Nanjing Wotian Technology Co., Ltd.

Pressure sensor manufacturing for 20 years.

You are here: WT Home > Products > Flowmeter

  • Integrated Electromagnetic Flowmeter PCL-E10
  • Integrated Electromagnetic Flowmeter PCL-E10

Integrated Electromagnetic Flowmeter PCL-E10

Product Overview

The PCL-V10 series vortex flowmeter is a fully intelligent flowmeter developed by combining advanced domestic and foreign technologies. It has the characteristics of simple structure, low power consumption, small resistance loss, stable operation, long durability, and easy installation.

The PCL-V10 series vortex flowmeter pays attention to every step in the process of design, material selection, process manufacturing, production assembly, and factory testing; The product has a variety of output signal forms, including standard analog signals and standard digital signal output signals, which are easy to use with digital systems such as computers and se- condary instruments, achieving the intelligence,standard-

ization, and universality of the product.

Features

 Advanced circuit design, with both low-power amplifier and current output signal functions on the circuit board

The product measurement range is relatively wide

Output signal 4mA~20mA two-wire current signal corresponding to flow rate

Display both cumulative and instantaneous traffic simultaneously

With five stage nonlinear correction, small signal removal, and free damping time setting function

Fully universal design, small overall size, and compact structure. Suitable for flow measurement of liquid and gas media with different diameters

New digital filtering and correction functions make flow measurement more accurate and reliable

Advanced humanized design, easy to operate and use

 

Application

The measurement and control of compressed air and general gases (such as oxygen, nitrogen, hydrogen, natural gas, coal gas, etc.), water, and liquids (such as water, gasoline, alcohol, benzene, etc.) in industries such as petroleum, chemical, metallurgy, heating, textile, and papermaking.

 


Product Parameters

Performance parameter


Accuracy

Liquid; ±1.0%

Gas; ±1.5%

Pipe diameter

DN15DN300

Rated pressure

GB; PN2.5, PN6, PN16, PN25, PN40, PN63, PN100, PN160, PN250

ANSI; CLASS 150, CLASS 300, CLASS 600, CLASS 900

DIN; PN10, PN16, PN25, PN40, PN63

JIS; 5K,10K, 16K, 20K, 30K, 40K, 63K

Special pressure: customizable

Medium temperature

Ordinary temperature: -40℃0℃

Moderate temperature: -40℃250℃

High temperature: -40℃350℃

Body material

Stainless steel 304 (conventional)

Range ratio

1:10(Theoretical value)

Flow rate range

Liquid (water): 0.7m/s7m/s

Gas: 5m/s70m/s

Steam: 4m/s70m/s

Reynolds number

1.5×1044×106

Drag coefficient

Cd≤2.4

Power supply and output signal

24VDC: pulse output signal (without display), 4-20mA/pulse (with display), 4-20mA/pulse/485 (with display)

Battery powered: No output signal (with display)

Protection grade

IP65

Ambient temperature

Non explosion-proof locations: -40 ℃~55 ℃; Explosion proof location: -20 ℃~55 ℃

Explosion proof

Explosion proof (24VDC) certificate number: CNEx22.4919X mark: Ex db IIC T6 Gb


Overall dimension

Outline structure

                           Dimension                       Unit:mm

PCL-V10J Clamping Vortex Flowmeter











image.png 






 

In the above figure, A represents the length of the flow meter measuring tube; B represents the diameter of the flowmeter interface; C represents the length between the top of the meter head and the bottom of the pipeline interface.

The outer dimensions of the flange clamped vortex flowmeter are shown in Table 1.

Table 1 Boundary Dimensions of Flange Clamping Vortex Flowmeter


Production process

PC90D Monocrystalline Silicon  Differential Pressure SensorPC90D Monocrystalline Silicon  Differential Pressure Sensor

PC90D Monocrystalline Silicon  Differential Pressure SensorPC90D Monocrystalline Silicon  Differential Pressure Sensor

PC90D Monocrystalline Silicon  Differential Pressure SensorPC90D Monocrystalline Silicon  Differential Pressure Sensor


                                         Testing Equipment


PCL Battery Type Electromagnetic Flow MeterPCL Battery Type Electromagnetic Flow Meter

PCL Battery Type Electromagnetic Flow MeterPCL Battery Type Electromagnetic Flow Meter

Certificate

PCWJ Series Vortex Flow Meter

Company profile

PCM580 Digital Pressure Gauge (Φ80mm)

Nanjing Wotian Technology Co., Ltd. was established in 2005. It is an outstanding top sensor mkanufacturing enterprise in Jiangning District. The company was rated as Nanjing Engineering Technology Research Center and Nanjing. Municipal Engineering Research Center, Nanjing Enterprise Technology Center, Nanjing Postdoctoral Innovation Demonstration Base; is the unit that formulated the national standards for "Silicon Piezoresistive Pressure Sensitive Chips" and "Silicone Pressure Sensors". It is the leading domestic manufacturer of pressure sensors, with core technology of diffused silicon pressure sensor pressure transmitter, level sensor and temperature sensor and existing staff 305. The annual production of pressure sensors is more than 2 million. The products have been exported to more than 70 countries and regions. Nanjing Wotian was awarded the honorary title of "Sensor Application Program Demonstration Enterprise" by the Ministry of Industry and Information Technology in 2019. "Creating value for customers" is the goal that enterprises always pursue. As leading manufacturer in the domestic pressure sensor industry, the company will revitalize China's pressure sensor business as its own responsibility, work diligently, step by step, strive to make pressure sensors better, and provide customers with cost-effective sensors.  Nanjing Wotian Technology Co., Ltd. has passed ISO9001-2015 quality management system certification and TS16949 certification for the automotive industry.


Company advantage

Mass production

We have one production center in Nanjing and one production center in Anshan with 20,000㎡plant and 170 units of production equipments. The main annual capacity of sensors is about 2,000,000 pieces.

Imported equipments

We imported 20 sets of pressure controller and 150 units of testing ovens to our production line.

Informatization management

We have the information management system of CRM, PLM, ERP, MES and DINGDING etc.

Comprehensive testing

We have our own lab and testing equipment such as lightning stroke, surging, static electricity, vibration, high-low temperature impact test and helium mass-spectrum leak detection.